Trendmaster Pro Online Condition Monitoring System

Overview

Trendmaster® Pro is its innovative architecture, which links hundreds of permanently mounted transducers and measurement points onto a single-cable sensor network.

Trendmaster-ProTrendmaster® Pro is its innovative architecture, which links hundreds of permanently mounted transducers and measurement points onto a single-cable sensor network, and brings the data into System 1® software. Wiring costs are dramatically reduced when compared to a conventional continuous monitoring system, yet individual measurement points can be scanned by the system every few minutes to provide quasi-continuous condition monitoring data.

Trendmaster Dynamic Scanning Module (DSM)

DSMs are used to scan and capture data from connected transducers in a Trendmaster Pro system, condition this data into the measurements of interest, and pass this to System 1 software. Data can be introduced into a DSM via a TIM Input Card. This card accepts inputs from Transducer Interface Modules (TIMs) connected to the Trendmaster system’s unique “sensor bus” cabling which supports hundreds of points on a single cable or via an appropriate Direct Input Card. These cards support direct wiring of transducers, without the use of “sensor bus” cabling and TIMs.