MGCsplit – rugged data acquisition system

Data Acquisition in conditions of Sun , wind, heat, cold, dirt, mud and wet are no problem for the IP65 version of MGCsplit. Gas-tight connectors, electrically-isolated inputs and a wide temperature range allow direct attachment to the test object, even in the most demanding environmental conditions.

If you are involved in mobile site measurements of any kind, you well know the strict demands that are placed on measurement instrumentation. Not only does it have to perform perfectly under severe mechanical and environmental conditions, but it usually needs to be installed where space is at a premium. If you want to have all these requirements fulfilled by your mobile data acquisition (MDA) system, then look no further than MGCsplit - it's a split-design, mobile data acquisition system that offers you the best results money can buy.

MGCsplit offers you the assurance that it is based on the field-proven components of the MGCplus DAQ system. Each compact module is housed in a ruggedized enclosure. You can assemble a high-precision MDA system by simply interconnecting the various MGCsplit modules. In test-bench applications, you can use a regular MGCplus DAQ instrument as the base unit, and extend its capabilities rapidly by connecting additional MGCsplit modules, as required.

For field use, MGCsplit's universal power pack, with its wide input range, is already prepared for battery supply. Simultaneous and independent data recording on a PC-card hard disk and a PC improve data security and the flexibility of the measurement system.

Lack of space?

The compact modules can be distributed throughout the limited space in the field use. System functionality is achieved by simply connecting individual modules

• Only one cable is required for both power supply and data transmission
• The intelligent power supply module covers all common voltages (12V, 24V and 42V)
• Easy and secure horizontal or vertical stacking of modules

Reliable measurement

MGCsplit is based on the components of the proven MGCplus system:

• All common transducer types can be connected
• 24 bit A/D converter for each channel
• Parallel and synchronous acquisition on all channels
• Data acquisition with and without PC
• On-board storage with the PC-card hard disk
• Data compression
• Free computation and control functions
• Data retrieval via GSM net, wireless Ethernet
• MGCplus software compatibility

All can be used at the same time

• Ethernet
• Can bus
• ProfibusDP
• On-board storage