The SoMat eDAQlite Battery Layer (ELBAT-2) is located below the eDAQlite in a machined aluminum enclosure. It attaches with four 8-32 screws to the base plate of the eDAQlite, replacing the rubber feet. The feet can be relocated to the battery layer for mounting purposes. A short cable, with the eDAQ D-Sub power connector, connects to the eDAQlite and is also utilized for charging purposes.
The battery is a lithium polymer (LiPo) pack with a capacity of 4000 mAh. Depending on the eDAQliteconfiguration, it can support a system for more than 10 hours. Since every eDAQlite configuration is unique; measuring the current draw, or using guidelines for power estimates, will determine the performance on your system.
Size: 5.625″W x 7.875″L x 1.0″H (14.3cm W x 20cm L x 2.54cm H)
Weight: 3.0 lbs (1.37kg)
Temperature: 0° to 140° F
Connectors: D-Sub Power Connector
Power Supply: 14.8 – 12V
Volts Capacity: 4000 mAh
Charge/Discharge Cycles: 300+
Re-Charge Rate: About 1 hour
(1) Charging System (ELBAT-CHARGER)
Cables and Accessories
eDAQ-lite Replacement Battery
The SoMat eDAQ-lite Replacement Battery (ELBAT-RB) is the replacement battery for the SoMat eDAQ-lite Battery Layer (ELBAT).
eDAQ-lite Replacement Charger
The SoMat eDAQ-lite Replacement Charger is the replacement battery charger for the SoMat eDAQ-lite Battery Layer (ELBAT). Not Available in EU Countries
Product No.: ELBAT-CHARGER